We can produce conveyor rollers of various standards, diameters, lengths, and types
Welcome to write to us
|Fabrication Services flat belt idler pulley for belt conveyor
|Used in electric power, metallurgy,mine,coal, cement,steel,chemical, port, hydroelectric power and grain industries
3)Length:500mm-5000mm,depends on the belt width of the conveyor
|Big roving crack, deep groove ball with double sealing
|Pipe and bearing housing with automatic welding
|Smooth steel color surface, rubber lagging surface
|Red,green,blue or as require
|More than 30,000 hours
Our Pulley Features:
|Conveyor Pulley Test
1. All butt welds shall be full Penetration
2. All welds to be full seal welds to prevent rust
3. Shell seam welds are submerged arc (SAW)
4. Includes stress relieving of shell prior to machining
5. Ultrasonic testing of all shafts
6. Drillings for Temperature probe / vibration analysis device
7. Remove all butts and sharp edges
|Conveyor Pulley Shaft Selection
The major cause of conveyor pulley failure is excessive shaft deflection. The Conveyor Pulleys – ZheJiang HSCD Engineering department can perform Stress Analysis and Finite Element Analysis to maximize your conveyor pulley performance.
|Conveyor Pulley Shell Material
Q345B Carbon Steel
GR350 Carbon Steel
ANSI 4140 Alloy Steel
ASTM A514B Stainless Steel
|SKF/NSK/ /HRB/LYC, as customer request.
|Conveyor Pulley Lagging
Plain rubber lagging, Herringbone and CHINAMFG grooves are all available
. Hot Vulcanised Durometer
. Hardness 50-55-65 Shore A, M Grade
. Oil Resistant, Heat Resistant FRAS
•Drive pulley, Head pulley and Tail Pulleys
•Snub pulley & Bend Pulleys
•Self Cleaning Spiral CHINAMFG pulley & Drum Pulleys
• The thick pulley shell absorbs more stress.
• The large CHINAMFG angle provides superior belt tracking capabilities.
• True concentric machining provides:
• maximum contact with the belt,
• consistent belt content discharge,
• less deflection of shaft,
• less stress on the bearings
Conveyor Pulley Designs
•Liveshaft or Deadshaft types.
•Flat or crowned shell.
•Taconite, labyrinth or speciality seals.
•Oil or grease lubricated.
•Self centering or low pressure lock element designs.
Packaging & Shipping
ITALY CHINAMFG OU GROUP is a CHINAMFG international companies in the world advanced level . REAL is a registered trademark of CHINAMFG OU GROUP , designed and manufactured REAL brand roller, roller , large belt conveyors in Italy, Germany, Turkey and other countries have extensive influence , by customers alike. CHINAMFG OU GROUP valued Chinese market there is huge potential, has been dedicated to the development of China ‘s roller market. In order to meet the needs of the customers , after many visits screening, HangZhou CHINAMFG Conveying Machinery Co.,Ltd, advanced production technology and years of quality customers as a platform , has won REAL directors unanimously approved, CHINAMFG OU GROUP authorized HangZhou CHINAMFG Conveying Machinery Co.,Ltd REAL brand for the Chinese region specified design and development, production and sales, service as 1 of the company, CHINAMFG OU GROUP, with its strong technical foundation, rich belt conveyor production experience and the international influence of the brand as a backup support, REALwith CHINAMFG joint venture together to open up the Chinese market a variety of mine roller, belt conveyors businesses together to provide our customers with quality services. HangZhou CHINAMFG Conveying Machinery Co.,Ltd was founded in May 2 thousand and five. It’s a private enterprise of stock-holding system .It was located in the economic and technological development zone of Xihu (West Lake) Dis. town, HangZhou city. ZheJiang province .This place is beautiful and CHINAMFG ,and the transport is very convenient.On November 18, 2013, joint venture with the ITALY CHINAMFG OU GROUP, specializes in producing REAL brand TD75, DTII, DTIIA type fixed conveyor, mobile elevating conveyors, roller and roller.The products have gained various patents . We have got the national industrial products production license issued by the state administration of quality supervision, inspection and quarantine of the People’s Republic of China , the company has been identified as CHINAMFG trademarks in dHangZhou city committee. Enhance the brand of ‘YI LUN’.Our company has the right of exportation and the products are sold to Middle East ,Africa ,Australia ,Europe ,Southeast Asia ,Russia and some other countries and regions. The company has large lathe, numerical control, double pressing machine, double welding machine, double boring lathe, milling machine, sawing machine and so on .The company produces more than 2 thousand rollers a day and over 7 hundred thousand a year .We choose and use the special tube ,cold-drawing shaft and famous bearing to make the rollers ,and the rollers were sealed by nylon .The professional inspectors used testing equipments to examine waterproof , preventing static electricity ,sideways ,moving up and down ,revolving resistance and falling of the rollers .The examine result is that the qualified rate of the rollers is over 98%. The noise of the rollers is very low and its turning is very nimble .The life of the rollers is over 30000 hours ,and the products were praised by all the customers .The products were widely used for mine ,coal mine ,port ,steel plant ,electric plant ,feed-processing plant ,cement plant and some other enterprises. This company pursues that credit is as aim and puts the quality above all else .We request to live and develop with quality and credit .Strengthen the inner management and improve the quality of the products constantly .Offer the best products for customers from the beginning to the end .At the same time ,provide quality service for the customers ,because serving the customers well is also the aim of our enterprise.
|HangZhou CHINAMFG Conveying Co., Ltd
|Stainless Steelseamless pipe, welded pipe
|Any size as your demand
|Red, yellow,any color as your demand
|ISO 9001:2000 , BV Certificate
|At least 5000 hours
|Material for transport
|Common paint and baking varnish
|1500pcs per day
|7-15days after getting the deposite
|1.Large capacity,2.High speed.3.Easy to install,repaire and maintenance.4.High output,efficiency,low noise.
|1.Best price.2.Quality control whole process.3.Quick,efficient,comprehensive service.
1. who are we?
We are based in ZheJiang , China, start from 2005,sell to Mid East(64.00%),Eastern Asia(16.00%),South America(7.00%),Southeast Asia(7.00%),Africa(6.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
s final Inspection before shipment;
3.what can you buy from us?
Belt Conveyor,Conveyor Spare Parts,Conveyor Pulley,roller brackets,belts
4. why should you buy from us not from other suppliers?
We have a professional team with rich experience in conveyor industry at CHINAMFG Our team will provide first-class service to you.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,FCA,Express Delivery;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Cash;
|Frequency Control Motor
|Thickness of Rubber Surface:
|8mm 10mm 12mm 15mm 20mm
What safety considerations should be kept in mind when working with V pulleys?
Working with V pulleys involves certain safety considerations to ensure the well-being of individuals and the proper functioning of the equipment. Here are some important safety considerations to keep in mind:
1. Proper Guarding:
Ensure that V pulleys are adequately guarded to prevent accidental contact with moving parts. Guards should be in place to cover the pulleys and belts, minimizing the risk of entanglement, pinch points, or injuries caused by rotating components. Follow industry standards and regulations for guarding requirements and regularly inspect and maintain the guards to ensure their effectiveness.
2. Lockout/Tagout Procedures:
Before performing any maintenance or inspection tasks on equipment with V pulleys, implement proper lockout/tagout procedures. Lockout/tagout involves isolating the power source, de-energizing the equipment, and securing it with locks or tags to prevent accidental startup. This procedure ensures that the equipment remains in a safe and inoperable state during maintenance activities.
3. Personal Protective Equipment (PPE):
Wear appropriate personal protective equipment when working with V pulleys. This may include safety goggles or glasses to protect the eyes from flying debris, gloves to prevent hand injuries, and appropriate clothing to minimize the risk of entanglement. The specific PPE requirements may vary depending on the nature of the task, the environment, and local safety regulations.
4. Training and Education:
Ensure that personnel working with V pulleys receive appropriate training and education on safe operating procedures, maintenance practices, and emergency response protocols. Training should cover topics such as hazard awareness, proper use of equipment, lockout/tagout procedures, and the importance of following safety guidelines. Regular refresher training sessions can help reinforce safe practices and address any new safety concerns.
5. Inspection and Maintenance:
Regularly inspect V pulleys for signs of wear, damage, or misalignment. Pay attention to the condition of the belts, pulley grooves, and tensioning mechanisms. Maintain proper belt tension as per manufacturer recommendations to prevent slippage and ensure efficient power transmission. Promptly address any issues identified during inspections and conduct routine maintenance tasks to keep the pulleys in good working condition.
6. Load and Speed Limits:
Adhere to the load and speed limits specified by the manufacturer for the V pulleys and associated components. Exceeding these limits can lead to belt slippage, decreased efficiency, and potential equipment failure. Ensure that the V pulleys are selected and installed correctly based on the specific application requirements to avoid overloading or operating at excessive speeds.
7. Risk Assessment:
Conduct a comprehensive risk assessment of the work area and equipment to identify potential hazards related to V pulleys. Assess risks associated with installation, operation, maintenance, and emergency situations. Implement appropriate control measures to mitigate the identified risks and regularly review and update the risk assessment as needed.
It is essential to prioritize safety when working with V pulleys. By following these safety considerations and any additional guidelines provided by the equipment manufacturer, the risks associated with V pulley operations can be minimized, ensuring a safe working environment for all personnel involved.
How are V pulleys employed in automotive engines and accessories?
V pulleys play a crucial role in automotive engines and accessories by enabling efficient power transmission and driving various engine components. Here’s a detailed explanation of how V pulleys are employed in automotive engines and accessories:
1. Serpentine Belt System:
Modern automotive engines often utilize a serpentine belt system, which consists of a single, continuous belt that drives multiple engine accessories. The V pulley is a key component in this system, as it provides the necessary driving force for the serpentine belt.
2. Crankshaft Pulley:
The crankshaft pulley is one of the primary V pulleys in an automotive engine. It is connected to the crankshaft, which converts the reciprocating motion of the pistons into rotational motion. The crankshaft pulley drives the serpentine belt, which, in turn, drives various engine accessories.
3. Accessories Driven by V Pulleys:
V pulleys are responsible for driving several important engine accessories, including:
- Alternator: The alternator generates electrical power to charge the battery and power the vehicle’s electrical systems.
- Power Steering Pump: The power steering pump provides hydraulic assistance to make steering easier for the driver.
- Air Conditioning Compressor: The air conditioning compressor pressurizes refrigerant to cool the cabin air.
- Water Pump: The water pump circulates coolant throughout the engine to maintain optimal operating temperature.
- Engine Cooling Fan: In some vehicles, the engine cooling fan is driven by a V pulley to regulate the engine temperature.
4. Speed Control and Belt Routing:
V pulleys allow for speed control and belt routing in automotive engines. By using different-sized pulleys, the speed ratio between the crankshaft pulley and the driven accessories can be adjusted. This ensures that the accessories operate at the desired speed for optimal performance.
Additionally, V pulleys and the serpentine belt system allow for efficient belt routing, maximizing the available space in the engine compartment and optimizing the packaging of engine accessories.
5. Tensioning and Belt Alignment:
Proper tensioning and belt alignment are critical for efficient power transmission and preventing belt slippage or premature wear. V pulleys in automotive engines are often accompanied by tensioners and idler pulleys that help maintain the correct tension in the serpentine belt and ensure proper belt alignment.
6. Durability and Maintenance:
V pulleys used in automotive engines are designed to withstand the demanding conditions of engine operation, including high temperatures, vibrations, and continuous rotation. They are typically made of durable materials such as steel or aluminum.
Regular maintenance, including periodic inspection, tension adjustment, and belt replacement, is necessary to ensure the efficient operation of the V pulley system in automotive engines and accessories.
Overall, V pulleys are essential components in automotive engines and accessories, providing reliable power transmission and driving various engine systems. Their design features, combined with the serpentine belt system, contribute to the efficient operation of automotive engines, ensuring optimal performance and functionality of engine accessories.
In which industries are V pulleys commonly used?
V pulleys, also known as V-belt pulleys or sheaves, are commonly used in various industries due to their versatility and effectiveness in power transmission. Here’s an explanation of the industries where V pulleys are commonly employed:
1. Manufacturing and Industrial Sector:
The manufacturing and industrial sector extensively utilizes V pulleys in a wide range of applications. They are employed in machinery and equipment used in manufacturing processes, such as conveyor systems, pumps, compressors, machine tools, and packaging machines. V pulleys ensure efficient power transmission, enabling smooth operation and productivity in manufacturing facilities.
2. Automotive Industry:
V pulleys play a vital role in the automotive industry. They are used in various automotive systems, including engines, air conditioning systems, power steering systems, water pumps, and alternators. V pulleys in automotive applications ensure the proper functioning of essential components, contributing to the performance and reliability of vehicles.
3. HVAC and Refrigeration:
The HVAC (Heating, Ventilation, and Air Conditioning) and refrigeration industry heavily relies on V pulleys. They are employed in fans, blowers, and pumps used in HVAC systems, as well as in compressors and condenser units in refrigeration equipment. V pulleys facilitate efficient power transmission, enabling effective heating, cooling, and ventilation in residential, commercial, and industrial buildings.
4. Agriculture and Farming:
V pulleys are commonly used in the agriculture and farming industry. They are employed in agricultural machinery and equipment, such as tractors, combines, harvesters, and irrigation systems. V pulleys transfer power to various components, including pumps, augers, conveyors, and cutting mechanisms, ensuring efficient and reliable operation in farming operations.
5. Mining and Construction:
In the mining and construction industries, V pulleys find extensive use in heavy machinery and equipment. They are employed in excavators, bulldozers, cranes, loaders, and other mining and construction equipment. V pulleys facilitate power transmission to components such as hydraulic pumps, winches, and conveyor systems, ensuring reliable operation in demanding environments.
6. Power Generation:
V pulleys are utilized in power generation systems, including generators, turbines, and engines. They transfer power from the prime movers to the generators or other driven components. V pulleys in power generation applications contribute to the efficient conversion of energy and reliable electricity production.
7. Material Handling and Warehousing:
V pulleys are commonly employed in material handling and warehousing applications. They are used in conveyor systems, lifting equipment, and automated storage and retrieval systems. V pulleys enable the movement of materials and products, ensuring smooth and efficient logistics operations.
These are just a few examples of the industries where V pulleys are commonly used. Due to their versatility, reliability, and wide range of applications, V pulleys are employed in numerous industries and sectors that rely on efficient power transmission in their machinery and equipment.
editor by CX