China Standard Belt Conveyor Drive Head Bend Take up Snub CZPT Tail Ceramic Rubber Coated CZPT Herringbone Chevron Grooved Lagging Crowned Motorized Drum Pulley for Mining supplier

Product Description

Product Description

 

A conveyor will always consist of at least 2 pulleys, head pulley and tail pulley, with additional pulleys used depending on the configuration. Standard-duty pulleys are usually adequate for simple applications, but mine-duty and engineered pulleys are also available where heavy-duty pulleys are required.

Different kinds of conveyor pulleys
KONWEYOUR sells conveyor pulleys in all the following sub-categories: 

Head pulleys

The head pulley is located at the discharge point of the conveyor. It usually drives the conveyor and often has a larger diameter than other pulleys. For better traction, the head pulley is usually lagged (with either rubber or ceramic lagging material).

Tail and CHINAMFG pulleys

The tail pulley is located at the loading end of the belt. It comes with either a flat face or a slatted profile (wing pulley), which cleans the belt by allowing material to fall between the support members.

Snub pulleys

A snub pulley improves the traction of the drive pulley, by increasing its belt wrap angle.

Drive pulleys

Drive pulleys, which can also be the head pulley, are driven by a motor and power transmission unit to propel the belt and material to the discharge.

Bend pulleys

A bend pulley is used for changing the direction of the belt.

Take-up pulley

A take-up pulley is used to provide the belt with the proper amount of tension. Its position is adjustable.
 

Product Parameters

 

Type Belt width(mm) Standard Diameter(mm) Length(mm)
Drive Pulley           500 500

Length of the pulley depends on the belt width of the conveyor 

650 500~630
800 630~1000
1000 800~1150
1200 800~1150
1400 1000~1350
1600 1150~1600
1800 1150~1800
2000 1350~2000
2200 1600~2200
2400 1800~2400
Bend Pully           500 250~500
650 250~630
800 250~1000
1000 250~1600
1200 250~1600
1400 315~1600
1600 400~1600
1800 400~1600
2000 500~1600
2200 630~1600
2400 800~1600

Packaging & Shipping

 

Detailed Photos

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Carbon Steel
Surface Treatment: Baking Paint
Motor Type: Frequency Control Motor
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

pulley

What safety considerations should be kept in mind when working with V pulleys?

Working with V pulleys involves certain safety considerations to ensure the well-being of individuals and the proper functioning of the equipment. Here are some important safety considerations to keep in mind:

1. Proper Guarding:

Ensure that V pulleys are adequately guarded to prevent accidental contact with moving parts. Guards should be in place to cover the pulleys and belts, minimizing the risk of entanglement, pinch points, or injuries caused by rotating components. Follow industry standards and regulations for guarding requirements and regularly inspect and maintain the guards to ensure their effectiveness.

2. Lockout/Tagout Procedures:

Before performing any maintenance or inspection tasks on equipment with V pulleys, implement proper lockout/tagout procedures. Lockout/tagout involves isolating the power source, de-energizing the equipment, and securing it with locks or tags to prevent accidental startup. This procedure ensures that the equipment remains in a safe and inoperable state during maintenance activities.

3. Personal Protective Equipment (PPE):

Wear appropriate personal protective equipment when working with V pulleys. This may include safety goggles or glasses to protect the eyes from flying debris, gloves to prevent hand injuries, and appropriate clothing to minimize the risk of entanglement. The specific PPE requirements may vary depending on the nature of the task, the environment, and local safety regulations.

4. Training and Education:

Ensure that personnel working with V pulleys receive appropriate training and education on safe operating procedures, maintenance practices, and emergency response protocols. Training should cover topics such as hazard awareness, proper use of equipment, lockout/tagout procedures, and the importance of following safety guidelines. Regular refresher training sessions can help reinforce safe practices and address any new safety concerns.

5. Inspection and Maintenance:

Regularly inspect V pulleys for signs of wear, damage, or misalignment. Pay attention to the condition of the belts, pulley grooves, and tensioning mechanisms. Maintain proper belt tension as per manufacturer recommendations to prevent slippage and ensure efficient power transmission. Promptly address any issues identified during inspections and conduct routine maintenance tasks to keep the pulleys in good working condition.

6. Load and Speed Limits:

Adhere to the load and speed limits specified by the manufacturer for the V pulleys and associated components. Exceeding these limits can lead to belt slippage, decreased efficiency, and potential equipment failure. Ensure that the V pulleys are selected and installed correctly based on the specific application requirements to avoid overloading or operating at excessive speeds.

7. Risk Assessment:

Conduct a comprehensive risk assessment of the work area and equipment to identify potential hazards related to V pulleys. Assess risks associated with installation, operation, maintenance, and emergency situations. Implement appropriate control measures to mitigate the identified risks and regularly review and update the risk assessment as needed.

It is essential to prioritize safety when working with V pulleys. By following these safety considerations and any additional guidelines provided by the equipment manufacturer, the risks associated with V pulley operations can be minimized, ensuring a safe working environment for all personnel involved.

pulley

How do V pulleys contribute to efficient power transmission?

V pulleys play a crucial role in enabling efficient power transmission in mechanical systems. Here’s a detailed explanation of how V pulleys contribute to efficient power transmission:

1. Frictional Engagement:

V pulleys are designed with a V-shaped groove that matches the cross-section of V-belts. This groove profile allows for maximum contact area between the pulley and the belt, creating frictional engagement. The friction generated between the pulley and the belt enables the transfer of torque from the driving pulley to the driven pulley.

2. High Friction Coefficient:

V-belts used with V pulleys typically have a high friction coefficient. This characteristic enhances the grip between the belt and the pulley, ensuring efficient power transmission. The high friction coefficient helps prevent belt slippage, even under heavy loads or during sudden acceleration or deceleration.

3. Multiple V-Belt Contact Points:

Due to the V-shaped groove design, V pulleys provide multiple contact points along the length of the belt. This multi-point contact distributes the load across the belt and the pulley, reducing stress concentration on specific areas. It increases the overall power transmission capacity and improves the longevity of the belt and the pulley.

4. Flexibility and Shock Absorption:

V-belts used with V pulleys are flexible and elastic. This flexibility allows them to accommodate slight misalignments between the driving and driven pulleys, reducing stress on the system. Additionally, V-belts have shock-absorbing properties that help dampen vibrations and impacts, protecting the pulleys and other components from excessive wear or damage.

5. Noise Reduction:

V-belt drive systems are known for their quiet operation. The design of V pulleys, combined with the flexibility and smooth engagement of V-belts, minimizes noise generation. This makes V pulleys suitable for applications where noise reduction is desired, such as HVAC systems or indoor environments.

6. Speed Variation and Transmittable Power:

V pulleys allow for easy adjustment of speed variation by changing the pulley diameters or using pulleys with different groove sizes. This flexibility in speed control enables efficient power transmission in various applications. Additionally, V-belt drive systems can transmit a considerable amount of power, making them suitable for both low and high-power applications.

7. Maintenance and Replacement:

V pulleys are relatively easy to install, maintain, and replace. The simplicity of the design and the availability of standardized components contribute to the overall efficiency of the power transmission system. Regular inspection, proper tensioning, and occasional belt replacement ensure the continued efficiency of the V pulley system.

Overall, the unique design features and characteristics of V pulleys, combined with the use of V-belts, contribute to efficient power transmission by maximizing frictional engagement, distributing load, accommodating misalignments, reducing noise, and allowing for speed variation. These factors make V pulleys a popular choice for a wide range of mechanical systems that require reliable and efficient power transmission.

pulley

How do V pulleys differ from other types of pulleys?

V pulleys, also known as V-belt pulleys or sheaves, have distinct characteristics that set them apart from other types of pulleys. Here’s an explanation of how V pulleys differ from other pulleys:

1. Groove Shape:

The most notable difference between V pulleys and other pulleys is the shape of the groove on their outer circumference. V pulleys have a V-shaped groove, which is specifically designed to accommodate V-belts with a trapezoidal cross-section. This groove shape provides a wedging action that enhances the grip between the pulley and the belt, reducing the likelihood of slippage.

2. Friction-Based Power Transmission:

V pulleys utilize a friction-based power transmission system. The V-belt wraps around the V pulley, creating a frictional contact between the belt and the groove. This friction allows for the transfer of rotational motion and torque between the driving source and the driven component. In contrast, other types of pulleys, such as flat pulleys or timing pulleys, may employ different mechanisms, such as flat belts or toothed belts, for power transmission.

3. V-Belt Compatibility:

V pulleys are specifically designed to work in conjunction with V-belts. V-belts are flexible rubber belts with a trapezoidal cross-section that match the V-shaped groove on the pulley. The shape and dimensions of the V-belt are precisely engineered to provide optimal contact and grip on the V pulley. This compatibility between the V pulley and the V-belt ensures efficient power transmission and reduces the risk of slippage.

4. Torque Transmission:

V pulleys are particularly suitable for high torque transmission. The wedging action created by the V-shaped groove and the corresponding shape of the V-belt allows for efficient power transfer even under heavy loads or during sudden changes in speed or direction. The design of V pulleys enables them to transmit higher levels of torque compared to some other types of pulleys.

5. Speed Variation:

Another distinctive feature of V pulleys is the ability to achieve speed variation in power transmission systems. By changing the diameter of the V pulley, different speed ratios can be achieved between the driving source and the driven component. This flexibility in speed control allows for proper matching of operational requirements and efficient power transmission.

6. Damping Effect:

The flexibility of V-belts and the slight elasticity of the rubber material used in V-belts provide a damping effect in V pulley systems. This helps absorb vibrations and shocks in the mechanical system, contributing to smoother operation, reduced noise, and increased component longevity.

7. Common Applications:

V pulleys are commonly used in various applications, including automotive systems, industrial machinery, HVAC systems, and power transmission systems in appliances. They are especially prevalent in systems where high torque transmission, speed variation, and reliable power transmission are required.

By understanding the distinctive features of V pulleys, engineers and designers can select the appropriate pulley type for specific applications, considering factors such as power requirements, torque transmission, speed control, and belt compatibility.

China Standard Belt Conveyor Drive Head Bend Take up Snub CZPT Tail Ceramic Rubber Coated CZPT Herringbone Chevron Grooved Lagging Crowned Motorized Drum Pulley for Mining   supplier China Standard Belt Conveyor Drive Head Bend Take up Snub CZPT Tail Ceramic Rubber Coated CZPT Herringbone Chevron Grooved Lagging Crowned Motorized Drum Pulley for Mining   supplier
editor by CX

2024-05-15

v pulley

As one of leading v pulley manufacturers, suppliers and exporters of products, We offer v pulley and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of v pulley.

Recent Posts